Varytec LED Pad Bar Compact ST RGB, Руководство пользователя

Страница: 30 / 56

In sound mode, you have the option to activate one of twelve coloured LED shows, one of ten
available stroboscope LED shows and one of three show programmes. This setting is only rele‐
vant if the device is not controlled via DMX. The programme control is based on the signals
received via the built-in microphone. The sensitivity of the built-in microphone is set manually
via the controller on the device.
Press
[MENU] repeatedly until the display shows ‘Sou’ .
Use [UP] or [DOWN] to select the submenu ‘SouP’ . Confirm with [ENTER] and use [UP] or
[DOWN] one of 12 LED shows ‘SP01’ … ‘SP17’ . Confirm with [ENTER] . The display shows ‘Sxx’ .
Use [UP] or [DOWN] to set the programme speed in a range from ‘S01’ (slow) to ‘S99’ (fast).
Confirm again with [ENTER] to apply the setting.
Use [UP] or [DOWN] to select the submenu ‘SouF’ . Confirm with [ENTER] and use [UP] or
[DOWN] one of ten stroboscope shows ‘SF01’ … ‘SF10’ . Confirm with [ENTER] . The display
shows ‘Sxx’ . Use [UP] or [DOWN] to set the programme speed in a range from ‘S01’ (slow) to
‘S99’ (fast). Confirm again with [ENTER] to apply the setting.
Use [UP] or [DOWN] to select the submenu ‘SouM’ . Confirm with [ENTER] and use [UP] or
[DOWN] one of three preprogrammed shows ‘SM01’ … ‘SM03’ . Confirm with [ENTER] . The dis‐
play shows ‘Sxx’ . Use [UP] or [DOWN] to set the programme speed in a range from ‘S01’ (slow)
to ‘S99’ (fast). Confirm again with [ENTER] to apply the setting.
Operating mode ‘Sound’
Operating
LED lighting set
30