11 / 16
5.2. Master-Slave
1. Connect all devices to each other.
2. Choose for the first device an automatic program (Menu: Auto) or a color (Menu: CoLo).
3. Activate at every other device the slave mode (Menu: SLAV).
5.3. Wireless DMX
1. Choose rELE in the menu and confirm with ENTER.
2. Hold down the UP/DOWN button until you reach 200 and you can read out YES.
3. If you release the button the Wireless DMX indicator flashes one time. The connection was
successful.
Note:
The device stores the receiver. If you power off and on again the device will automatic
connect to the receiver.
If you use another receiver please make this connection again.