Varytec Giga Bar Pix 8 UV, Руководство пользователя

Страница: 35 / 52

A built-in automatic show can only be activated when the unit is operating in stand-alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘Prxx’ . Now you can select one of the preprog‐
rammed automatic shows. Use [UP] and [DOWN] to select a value between ‘Pr01’ and ‘Pr15’ .
To adjust the speed of the selected automatic show, press [SETUP] repeatedly until the display
shows ‘SPxx’ . With [UP] and [DOWN] you can now select a value between ‘SP01’ (slow) and
‘SP99’ (fast) or ‘SPFL’ (maximum).
To adjust the strobe frequency, press [SETUP] repeatedly until the display shows ‘FSxx’ . With
[UP] and [DOWN] you can now select a value between ‘SPFS00’ (slow) and ‘FS99’ (fast).
To adjust the fade speed of the selected automatic show, press [SETUP] repeatedly until the
display shows ‘Fdxx’ . With [UP] and [DOWN] you can now select a value between ‘Fd00’ (slow)
and ‘Fd99’ (fast).
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Operating mode ‘Built-in auto‐
matic show’
Operating
Giga Bar Pix 8 UV
35
LED bar