Varytec Giga Bar Pix 8 UV, Руководство пользователя

Страница: 32 / 52

This setting is only relevant when the device is controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘dxxx’ . Press [SETUP] . With [UP] and [DOWN]
you can now select one of the following DMX operating modes:
n
‘2-ch’ (two channels)
n
‘8-ch’ (eight channels)
n
‘10-ch’ (ten channels)
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘SLAv’ .
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
DMX mode
Operating mode ‘Slave’
Operating
32
Giga Bar Pix 8 UV
LED bar