Important:
Damages caused by the d
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
1.2. Additional Information for safety
Exessive temperature
Ta=40°C
Please do not use the device if the temperature exceeds 40°C/104°F.
Risk of breakage
If the lens is broken you
lens only for an original of the producer. Size of lens:
Drop safety
To avoid injuries carry the package only by twos.
mounting bracket has the ability to carry the te
device. Always u
working at the device the place below has to be vacated
UV protection and lamp explosion
Do not look unprotected directly into the light.
lens and the casing, but without the casing it is possible to cause damages
eyes.
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
you plug in the device
voltage and also a crowbar. Every device has to be grounded.
supply if you want to change a lamp or you have to open the device. You also have
to accomplish this action if there is a thu
Fire risk
Make sure that the fuse functioned. It is never allowed to bridge it.
exchange it only use fuses of the same type.
The distance between the device and lighted things has to be at least 3m. From a
distance of 3m the temperature of the beam subside among 60°C.
It is not allowed cover fans and
4 / 15
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
to be carried out according to the European safety standards.
Additional Information for safety
Exessive temperature
Please do not use the device if the temperature exceeds 40°C/104°F.
Risk of breakage
If the lens is broken you cannot use the device anymore. Exchange in this case the
lens only for an original of the producer. Size of lens: d = 74 x30mm.
To avoid injuries carry the package only by twos. If you install the device the
mounting bracket has the ability to carry the tenfold load of the weight of the
Always use a corresponding safety to safe the device additional. While
working at the device the place below has to be vacated
UV protection and lamp explosion
Do not look unprotected directly into the light. The UV radiation is
lens and the casing, but without the casing it is possible to cause damages
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
you plug in the device make sure that the power supply system has the right
voltage and also a crowbar. Every device has to be grounded.
if you want to change a lamp or you have to open the device. You also have
to accomplish this action if there is a thunderstorm or high humidity.
Make sure that the fuse functioned. It is never allowed to bridge it.
exchange it only use fuses of the same type.
The distance between the device and lighted things has to be at least 3m. From a
stance of 3m the temperature of the beam subside among 60°C.
It is not allowed cover fans and air in and outlets.
isregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
to be carried out according to the European safety standards.
Please do not use the device if the temperature exceeds 40°C/104°F.
device anymore. Exchange in this case the
d = 74 x30mm.
If you install the device the
nfold load of the weight of the
se a corresponding safety to safe the device additional. While
radiation is shielded by the
lens and the casing, but without the casing it is possible to cause damages on the
Make sure the electrical connection is carried out by qualified personnel. Before
make sure that the power supply system has the right
voltage and also a crowbar. Every device has to be grounded. Unplug the power
if you want to change a lamp or you have to open the device. You also have
nderstorm or high humidity.
Make sure that the fuse functioned. It is never allowed to bridge it. If you have to
The distance between the device and lighted things has to be at least 3m. From a
stance of 3m the temperature of the beam subside among 60°C.
