Varytec BAT.PARset 4 RGBW, Руководство пользователя

Страница: 36 / 64

In this menu, you can manually adjust the intensity of the basic colours for individual spots.
This setting is only relevant if the device is not controlled via DMX.
Press
[MENU] repeatedly until the display shows ‘MANUALLEDs’ . Use [UP] or [DOWN] to select
one of the following options:
n
‘LED’ : assign a colour (red, green, blue, cold white) to spot 1 … 4 using [UP] or [DOWN] .
n
‘WARM’ : set the colour intensity for front spots 1 … 4 using [UP] or [DOWN] .
Confirm the selection each time with [ENTER] . Use [UP] or [DOWN] to set the colour intensity in
a range from ‘000’ to ‘255’ . Confirm again with [ENTER] to apply the setting.
Press
[MENU]
repeatedly until the display shows
‘INFORMATION’
.
Use [UP] or [DOWN] to select the option ‘SOFTWARE’ to read out the version number of the
installed software.
Then use
[UP] or [DOWN] to select the option ‘HARDWARE’ to read out the version number of
the hardware.
Then use
[UP] or [DOWN] to select the option ‘FIX TIMES’ to retrieve the current turn-on time of
the spots.
Colour intensity individual
spots
Device info
Operating
36
BAT.PARset 4 RGBW
LED lighting set