19.0” C1-D2 Compliant Panel Mount PC
486-0032-0-00
11
PLEASE NOTE – ANY EQUIPMENT OR ASSOCIATED CABLING CONNECTED TO THIS
DEVICE MUST BE NON-INCENDIVE AND/OR SUITABLE FOR THE CLASS I DIVISION 2
AREA IN WHICH IT IS TO BE INSTALLED.
Power Connection (Power In)
AC models - The AC version of the Panel Mount PC includes an AC line cord which is 3ft long
with stripped wires at the connection end. The user must supply a lockable industrial-type power
supply plug to mate with their power outlet.
Also, the end user must either supply a switch to
their power outlet suitable for Class I, Division 2 use (if adjacent to the power outlet), or locate
the said switch outside the hazardous area.
DC models - The DC version of the Panel Mount PC has a lockable DC plug and socket
supplied to which the user’s DC source must be connected. If the DC source (power brick or
otherwise) is plugged into an AC socket within the hazardous area, the end user must supply a
lockable industrial-type power supply plug to their power outlet.
Also, the end user must either
supply a switch to their power outlet suitable for Class I, Division 2 use (if adjacent to the power
outlet), or locate the said switch outside the hazardous area.
Serial Connections (COM 1-3)
The Panel Mount PC is supplied with three serial connectors configured for RS-232. The
connector is a 9 pin female connectors and can be set up for any baud rate from 300 to 19.2
baud. The connector is located on the bottom panel of the system.
Ethernet Connections (LAN 1-2)
The Panel Mount PC is supplied with two integrated Ethernet connectors. The interface will
support 10/100/1000 BaseT connection to a local area network (LAN). The Panel Mount PC is
supplied with two RJ-45 female connectors located on the bottom panel of the system.
USB Connections (USB 1-4)
The Panel Mount PC is supplied with four USB 2.0 connectors located on the bottom front panel
of the system.
VGA Port
The 15-pin female VGA connector can be used to connect to any analog VGA monitor.
IEEE1394a (Firewire)
The Panel PC is supplied with two IEEE1394a ports which feature high speed, high bandwidth
which are hot pluggable to connect with IEEE1394 devices and peripherals.