VarTech Systems VT420 Series, Руководство пользователя

Страница: 4 / 43

4
If the power cord or plug is damaged or becomes hot, turn off the main power switch of the
monitor, make sure the power plug has cooled down and remove the power plug from the
outlet.
If the monitor is still used in this condition, it may cause a fire or an electrical shock.
Contact your dealer for replacement.
Installation
(when install the monitor, please follow the instruction on the manual)
Don't install in a high-temperature environment.
If the monitor is used in high-temperature or in direct sunlight, it may cause the case or other parts become
distorted or damaged resulting in overheating or electric shock.
Don't install in a high-humidity environment.
This may cause overheating or electric shock.
Don't install near any heat sources such as radiators, heat registers, stoves, or other
apparatus that produce heat.
This may cause a fire or electric shock.
Don't overload outlets or cables beyond electrical capacity.
Don't use extension cords as it may cause a fire or electric shock.
Don't insert the power plug into an outlet other than 100~240V AC.
This may cause a fire or electric shock.
Don’t use a damaged power plug or worn outlet.
Don’t insert the improper power plug it may cause a fire and electric shock.
Don't place the monitor on an unstable shelf or surface.
The monitor may fall causing injury. Please install on a horizontal, stable, level surface.
Don't place objects on the monitor.
If the monitor is covered or the vents are blocked, the monitor could overheat and cause a fire.
If metal or liquid gets into the monitor, it may cause a fire or an electrical shock.
Do not put heavy objects on the monitor as it may fall causing injury.
Please keep a10cm minimum distance between the monitor and the wall for sufficient ventilation.
Don't move the monitor when it is connected to the power cord and AV cables.
When moving the monitor, make sure to remove the power plug and cables from the outlet or source.
When unpacking or carrying the monitor, at least 2 people are needed. Make sure the monitor is carried
upright.
Transport the monitor upright. Avoid placing the monitor face up or down.
Handle the monitor gently. Do not drop.
VT420 Series www.vartechsystems.com