VarTech Systems VT201CM, Руководство пользователя

Страница: 25 / 30

20.1” PowerVue User Guide 150-055
MECHANICAL DRAWINGS
7
23
Section
7.1
Console or Panel Mounting
The VT201 monitors are designed for mounting on a console panel. Before installing the monitor on
a panel, ensure that the following conditions for installation are met:
•
Adequate ventilation must be available within the console to ensure that monitor is not exposed
to ambient temperatures above 50°C.
•
The relative humidity of the air within and around the console should not exceed 85%.
•
Following installation, there must be sufficient clearance around the ventilation holes in the
monitor’s rear enclosure to allow good circulation.
•
Power and earth ground should be accessible when the monitor is installed in the console.
Installation on a console panel should proceed as follows:
•
Refer to the appropriate outline and mounting drawings in Appendix F for dimensions and
locations of mounting holes.
•
Make a rectangular cut-out in the console panel to accommodate that part of the monitor’s
enclosure that projects backward behind its front panel. The monitor must drop into this cut-out in
such a way that the back surface of its front panel rests against the front surface of the console
panel on all four sides.
•
Drill holes around the periphery of the cut-out just made in the console panel. The holes should
be located in such a way that they will align with the mounting holes on the monitor.
•
Power, ground and video connections can be made prior to installing the monitor in the console
panel, or afterwards, if there is sufficient access to the rear of the console. Assess the situation
before making final installation of the monitor.
•
Position the monitor in the console panel cut-out and install screws through the mounting holes
to secure the monitor.
NOTE: To provide maximum comfort for the user, the monitor should be mounted so that the
top of the screen is at or slightly below eye level, and so that light from nearby windows,
overhead fixtures, etc. does not reflect off the screen.
Mechanical Drawing Description Page
VT201PM 20.1” PowerVue Panel Mount 25
VT201RM 20.1” PowerVue Rack Mount 26