VT181CH / VT181CHE User Guide 150-066
Use the HD15 to DB9 video adapter cable to connect the flat panel display to the EPDG I/O
adapter board.
Use the HD15 to 5BNC video adapter cable to connect the flat panel display to the original
Red, Green, and Blue coax cable connected to the PDG I/O adapter board. The 2 extra BNC
cables on the video adapter are not used.
5
Note:
The following figure is the view looking into the pin end of the male connector or solder
term end of the female connector.
HD15 Connector
The following table provides the pin numbers and corresponding
pin assignments for the HD-15 video connector.
Pin
Signal
1 Red
Video
2
Green Video (SOG PDG only)
3 Blue
Video
4 Not
Used
5 Not
Used
6 Red
Video
Ground
7
Green Video Ground
8 Blue
Video
Ground
9 Not
Used
10 Ground
11 Ground
12 Not
Used
13
Horizontal Sync (EPDG only)
14
Vertical Sync (EPDG only)
15 Not
Used
2.5
Signal Connections Cont.
HD15 Connector
Female
