VarTech Systems VT121 DiamondVue Series, Руководство пользователя

Страница: 4 / 22

4
1.2
Product Safety Precautions
Ensure that sufficient space is available around the display to provide the circulation
necessary for cooling.
Ensure that the ambient air temperature will not exceed the specified maximum
temperature.
Do not attempt to service this display yourself. The rear chassis has a seal so that non
qualified personnel will not expose themselves to dangerous voltages or other risks.
To protect from electrical shock, unplug the display power supply from the wall before moving.
Do not expose the display to direct sunlight or heat.
Do not use this display near water.
Do not place any heavy objects on the power cords. Damage may cause electrical shock.
⇒
Unplug the power supply from the wall or unit if one of the following conditions exists:
Power cord or plug is damaged or frayed.
Liquid is spilled onto the display or the display is exposed to rain or water.
The display does not operate normally when the operating instructions are followed.
The display has been dropped or the enclosure has been damaged.
The display exhibits a distinct change in performance, indicating a need for service.
SECTION 2
DISPLAY SETUP
2.1 VT121
Series Display Features
The VT121 is capable of displaying 16.8M colors in a continuous spectrum. The high contrast
LCD enhances the image with no geometric distortion.
The VT121 Series directly accepts an analog 5 wire RGB with separate H/V.
The VT121 Series is auto synchronous adjusting the display to the appropriate VGA input.
The VT121 Series is available in Panel Mount industrial packages.
The VT121 Series is supplied with an Anti-Reflective Screen unless equipped with an optional
Touch System.
The VT121 Series has 120 VAC supply as standard.
2.2
Unpacking and setting up your display
Your LCD monitor package will consist of the components listed below. Open shipping
container and lay all components on a flat clean surface.