background image

 

POWX07590 

EN

 

Copyright © 2019 VARO 

P a g e

 | 

15

 

www.varo.com 

15 ENVIRONMENT 

Should your appliance need replacement after extended use, do not dispose of it 
with the household refuse, but in an environmentally safe way. 
Please dispose of used motor oil in a manner that protects the environment. We 
suggest you take it in a sealed container to your local service station for recycling. 
Do not throw it into the refuse or pour it on the ground 

16 DECLARATION OF CONFORMITY 

 

VARO N.V.

   -    Joseph Van Instraat 9  -  BE2500 Lier  -  BELGIUM, declares that, 

product: 

Table saw 

trade mark: 

PowerPlus 

model: 

POWX07590 

is in conformity with the essential requirements and other relevant provisions of the applicable 
European Directives, based on the application of European harmonized standards. Any 
unauthorized modification of the apparatus voids this declaration. 

European Directives (including, if applicable, their amendments up to the date of signature); 

2011/65/EU 
2014/30/EC 
2006/42/EC 

European harmonized standards (including, if applicable, their amendments up to the date of 
signature); 

EN62841-1 : 2015 
EN62841-3-1 : 2014 
EN55014-1 : 2017 
EN55014-2 : 2015 
EN61000-3-2 : 2014 
EN61000-3-11 : 2000 

Keeper of the Technical Documentation : Philippe Vankerkhove,  VARO 

– Vic. Van Rompuy 

N.V. 

The undersigned acts on behalf of the company CEO, 

 

Philippe Vankerkhove 
Certification Manager 
Lier, 22/05/2019 

Содержание POWER PLUS POWX07590
















Отзывы: