POWX0496
EN
Copyright © 2021 VARO
P a g e
|
4
www.varo.com
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4
Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5
Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIAL SAFETY INSTRUCTIONS FOR POLISHING TOOL
Use the polishing tool only in a clean and dry environment.
The polishing tool should be placed on the intended surface before being switched on or
off.
Keep children away by taking the appropriate precautions.
Avoid switching on the tool accidentally.
If the tool is plugged into the mains keep your finger off the switch when carrying the tool
from one place to another.
Never carry or pull the tool by its power cable.
Protect the cable from heat, oil and sharp edges.
Check the cable for damage before each use.
Do not apply too much pressure when polishing, but simply allow the tool to glide over the
surface.
Check the housing and switch for damage.
Do not use the polishing tool if the housing or switch is defective.
