POWX0041LI
EN
Copyright © 2018 VARO
P a g e
|
10
www.varo.com
▪
Store your batteries in a cool area. Optimal temperature for storing your Li-ion battery for
longer term is 2°C. (capacity loss will only be 6% / year (compared to 20% at 25°C)).
Never store batteries in discharged condition.
▪
It is better for Li-ion batteries to recharge them frequently. Optimal long time storage
charge for your Li-ion battery is at 40% of their capacity.
11 TECHNICAL DATA
Rotation Speed
0-350 / 0-1300 min-1
Max. Drill-bit diameter
10 mm
Rated Voltage DC (Un)
12V
Battery capacity
1500 mAh
Battery type
Li-ion
Max. torque
25Nm
Number of LED’s
2
Chuck type
10 mm keyless Chuck
Torque positions
17+1
Plug Type
VDE
Charger output voltage /current
13.5 V / 1.5 A
Charger time
1 H
Battery quantity
1
12 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
85 dB (A)
Acoustic power level LwA
96 dB (A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
aw (Vibration)
9,1m/s²
K = 1.5 m/s²
13 WARRANTY
▪
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
▪
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
▪
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪
Repairs may only be carried out by an authorized customer service centre for Powerplus
tools.
▪
You can always obtain more information at the number 00 32 3 292 92 90.
▪
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
▪
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
