POWXG9025
EN
Copyright © 2014 VARO
P a g e
|
10
www.varo.com
11 MAINTENANCE AND CLEANING
WARNING! Always disconnect the electrical plug from the socket prior to
maintenance or cleaning.
To ensure a long and problem free working life, please take the following advice:
Wash out water hose, high pressure hose, spray lance and accessories before mounting
Clean the connectors of dust and sand.
Rinse the detergent spraying attachment after use.
Clean the nozzles.
Any repair should always be made in an authorized workshop with original spare parts
11.1
Cleaning of inlet filter
Clean the water inlet filter regularly once a month or more frequently according to use.
Carefully loosen the filter with a screwdriver and clean it. Check that it is intact before re-
mounting it.
The inlet filter must always be fitted inside the water inlet pipe to filter out sand, limestone
and other impurities, as they will damage the pump valves.
CAUTION: Failure to fit the filter will invalidate the warranty
11.2
Cleaning of air vents
The machine should be kept clean so as to let cooling air pass freely through the machine
vents.
11.3
Greasing of couplings
To ensure an easy connection and that o-rings do not dry up; the couplings should be greased
regularly.
12 STORAGE (FIG. 10)
The machine should be stored in a frost-free room!
Pump, hose and accessories should always be emptied of water prior to storing as follows:
1.
Stop the machine (press the start/stop switch “O” and detach water hose, high pressure
hose and nozzle.
2.
Restart the machine and activate the trigger of the trigger gun. Let the machine run until
no more water runs through the trigger gun
3.
Stop the machine, unplug and wind up hose and cable.
4.
Place trigger gun, lance, nozzles and other accessories in the holders of the machine.
The hook can be used for storage of the hose and cord
Should the machine by mistake be frozen, it will be necessary to check it for damage.
WARNING: Never start up a frozen machine. Frost damages are not covered
by the guarantee!
