Varma Tec WR2000, Руководство по эксплуатации

Страница: 10 / 36

10
ENGLISH
Connect the appliance to the electrical power supply only if the system
is able to provide the maximum electrical voltage and capacity indicated
on the rating plate at maximum power.
Before carrying out any type of cleaning or maintenance operation, turn
the appliance off and turn the main power switch off to disconnect it from
the power supply.
Should the appliance be dropped or suffer a heavy blow, have it checked
immediately by Star Progetti.
When carrying out maintenance operations, never touch the bulbs
directly, but only the terminal casings. The bulb will be damaged by contact
with naked hands; in this eventuality the product guarantee will no longer
be considered valid.
In the event of accidental contact with the surface of the bulb, clean it
immediately by wiping with a cloth dipped in denatured alcohol.
If the appliance does not function correctly or develops a fault, turn it
off and contact Star Progetti immediately.
Ensure that only genuine original Star Progetti spares are used for any
repairs. If the cable or the power plug are damaged, take the appliance to
an authorised Star Progetti service centre for replacement. Use a cable
with T180 characteristics.
Switch off the appliance at the main switch: a) if the appliance does not
function correctly; b) before cleaning the outside of the appliance; c) if the
appliance is not to be used for long periods of time.
Do not cover or block the appliance during use.
In order to avoid creating a fire hazard, the appliance must never be
installed with the radiating elements close to or facing towards curtains,
beds or other objects or materials that are liable to burn easily; always
ensure that these objects are at a suitable minimum distance, to avoid any
risk of fire or heat damage.
Never use the appliance in combination with programming devices,
timers or other devices that will switch it on and off automatically.
When
the connection is made directly to the main electric net:
- You need to provide a device to ensure the all-pole disconnection
from the electric net with a opening distance from the
contacts, allowing a complete disconnection in the conditions of
overvoltage category III, in accordance with the installation
instructions.
1. TECHNICAL DATAS
Power: 2000 Watt
IP23 Infrared Heater protected against rain
220-240V 50/60 Hz Class I
2. EQUIPMENT
Appliances WR2000 are supplied complete with:
Steel body in aluminium alloy, kiln varnishing with epoxy powders.