Varma Tec HED66GBK-120, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 24

7
MAINTENANCE INSTRUCTIONS
REPLACEMENT OF THE EMITTER
To be performed by qualified staff or specialized technician
- Disconnect the heater from the power supply.
- Assure the heater has been unplugged for at least 1 hour to cool down and avoid any possible burn situation.
CLEANING
Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the heating
element of the heater is cool.
To maintain the heating efficiency of your TITAN, occasionally dust the reflector
and emitter with a clean brush, soft cloth or compressed air (Do not touch the heat emitter with your fingers as
residue from your hand could affect the life of the emitter).
THE MANUFACTURER SHALL NOT BE LIABLE IN THE EVENT OF NON OBSERVANCE OF THE ABOVE
INSTRUCTIONS.
17
66GBK20 2000W
BULB REPLACEMENT