Variquest Motiva 400, Руководство пользователя

Страница: 16 / 26

VariQuest
®
Motiva™ 400 User’s Guide
2-7
Installing Ink Cartridge
Fan-Fold Label Stock
Installing Ink Cartridge
When the cartridge reaches 10% remaining, the VariQuest Design Center
Software will prompt you to replace the cartridge. If quality still looks acceptable,
you can choose to ignore this warning. However, you may waste labels if the
cartridge runs out of ink before the next warning at 0%. If you choose to replace
the cartridges follow the procedure below.
Note:
Ink Cartridge Levels are estimated based on analysis of the printed images
by the driver during spooling. This analysis estimates the number of ink droplets
(spits) required to print the image and subtracts that amount from the total amount
in the cartridge. There is no real time sensor that shows the actual amount of ink
in the cartridge.
After installing a new cartridge, you can run an alignment print to achieve
maximum quality. However, this requires cancelling the print job.
To replace the print cartridge:
1. Open the Top Cover of the printer.
2. Press the Ink Button on the printer. The Cartridge Carrier will align itself to
the center of the print area.
3. Press the Cartridge Cover Release to open the Cartridge Holder . Remove
the cartridge (if installed).