VARIOBOTIC VA-Art-00018, Руководство по эксплуатации

Страница: 33 / 62

Operation and usage
Operating instructions
VarioShaker 270 with control box
Page 33 of 62
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
6.2 Initial setup of network
The control box is in the DHCP mode by default and is automatically assigned an
IP in a network. If this is not the case, you can assign a fixed IP address as follows:
▪
Open the control box
▪
Connect a monitor (Micror-HDMI) to the control
▪
Also connect a keyboard via usb
6.2.1 DHCP / STATIC
A set-up mode is activated by default:
„Set network type: (DHCP) or (STATIC):”
By entering DHCP - confirmation through enter - tbe control box is restarted in
DHCP mode (wait for about 120 seconds).
By entering STATIC - confirmation through enter - you receive further input options
that you also confirm with enter:
„Enter a valid IP:“ -
Assign the desired IP address
subsequently
„Enter a valid NetMask:“
- Assign the desired SUP network mask
subsequently
„Enter a valid Gateway:“
- Assign the desired gateway
With confirmation through enter, the control box is restarted in DHCP mode (wait
for about 120 seconds).
A tip / note from the manufacturer
It is also possible to manually set the IP address later through the settings
(
see 6.6 Start page settings (yellow), page 47 ).
DHCP
STATIC