Varimixer V30K, Запасные части и руководство по эксплуатации

Страница: 13 / 32

13
Part Action Frequency Note
Bowl screen Check the safety of the bowl screen:
Does the tool stop rotating when the
screen is tilted/removed? Regularly
If the tool does not immediately
stop rotating on tilting/removal of
the screen, the machine must not
be used.
Call the engineer
Emergency stop Test the emergency stop: Does the tool
stop rotating when the emergency stop
is activated? Regularly
If the tool does not immedia-
tely stop rotating on activation of the
emergency stop, the machine must
not be used.
Call the engineer
Mixer head The mixer head should only be lubri-
cated on repair, see the section
“Lub-
rication and grease types” .
During repairs
The machine’s
other moving
parts The moving parts that belong to the
bowl’s lifting mechanism all run in
maintenance-free plain bearings and
should not therefore be lubricated. Never
Attachment drive The rubber plug for covering the open-
ing of the attachment drive should be
on the machine and be intact. Daily
The rubber plug must cover the
opening on the attachment drive
when the latter is not in use
.
Cleaning Follow the instructions in the section
“Cleaning”
Follow the instructions
in the section “Cleaning”
s
ystematic maintenance
:
r
eadinG the machines data
:
Press the stop button for 5 sec. The machine’s data will then be displayed as alternating text in the display. There are five
readings corresponding to the five data sets described below:
•
Data set 1:
States firmware version, displayed as “F” followed by three figures, e.g. = firmware version 3.
•
Data set 2
: States the machine’s running time, displayed as “t” followed by three figures, which indicate the number of
9.999-minute cycles, e.g. = 2 x 9.999 min., or 19.998 min.
•
Data set 3
: Displays four figures, which indicate the number of minutes the current cycle has been running, e.g.
=
1.234 min.I.e., if is displayed followed by , the machine has been running for 19.998 min. + 1.234 min.,
or a total running time of 21.232 min.
•
Data set 4 : States the number of times the machine has been disconnected from the power supply (plug pulled out of the
machine/powercut/switched off) and restarted, displayed as “r” followed by three figures, which indicate the number of restarts,
e.g. = 2 x 9,999 restarts, or 19,998 restarts.
•
Data set 5
: Displays four figures, which indicate the number of restarts which have happened in the current cycle, e.g.
= 1234 times. In other words, if is displayed followed by , the machine has restarted a total of 19,998 +
1,234 times, or 21,232 times.
r
eadinG the error loG
:
It is possible to display a log of the errors that have occurred:
•
Hit emergency stop and press next to .
• The display shows the latest error first.
•
To scroll back through the errors, press next to ; to scroll forward, press next to .
•
The last eight errors can be displayed.
•
Deactivate emergency stop to cancel the display