Varimixer V150PL, Запасные части и руководство по эксплуатации

Страница: 5 / 36

5
1. Lower the bowl using the bowl
lift switch on the front panel.
4. Close bowl screen and raise
the bowl arms into the up
position.
5. Turn timer to 10 minutes and
push “start” .
6. Insure cover is rotating in
the correct direction.
2. Open the bowl screen.
3. Remove the bowl
and tools.
Bowl Lift
Start
Stop
Timer
JOG
button
Read this page entirely BEFORE beginning installation .
VARIMIXER INSTALLATION INSTRUCTIONS
UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER OR THE BOWL ARMS TO BE USED TO
MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT. IT IS RECOMMENDED
THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT.
The mixer must be mounted with the rubber feet, which neutralize both shaking and rusting. Spacers can
be inserted under the mixer’s feet if the floor is uneven. The mixer can be bolted to the floor if desired.
Before the mixer is connected to power, it should be checked that the voltage and frequency on the
rating plate is correct in relation to the place of installation. A unit labeled 208V 3 Phase will operate from
190V to 230V 3 phase safely. The rating plate is located on the rear right side of the mixer. The electrical
connection box is located at the top rear of the mixer.
WARNING
Electrical and grounding connections must comply with applicable portions of the National Electrical
Code and/or other local electrical codes.
Wire Color Codes
White-Phase 1
Red -Phase 2
Black-Phase 3
Green-Ground
No Neutral is used in the United States and Canada
Bowl Lift
Start
Stop
Timer
JOG
button