USER MANUAL
WWW.VA R I - L I T E .CO M
VL5LED WASH
17
TABLE 2.
VL5LED WASH CONTROL CHANNEL
DMX LED
GROUP
PARAMETER
DEFAULT
RANGE
DESCRIPTION
1
16
28
28
Control Channel
0
0 - 255
Control Channel used for full
fi
xture settings, lamp
controls, and miscellaneous modes. Set discrete value
of desired effect, wait >3 seconds, then set value to 0
(Idle).
0 - 5
Idle (Default)
6 - 10
Full Luminaire ReCal
11 - 15
Fixture Shutdown
16 - 20
Reserved Values
21 - 25
Reserved Values
26 - 30
Reserved Values
31 - 35
Reserved Values
36 - 40
Reserved Values
41 - 45
Reserved Values
46 - 50
Reserved Values
51 - 55
Reserved Values
56 - 60
Reserved Values
61 - 65
Reserved Values
66 - 70
Reserved Values
71 - 75
Reserved Values
76 -80
Display On
81 -85
Display Off
86 - 90
Status Check
91 - 95
Color Calibration on
96 - 100
Color Calibration off (Default)
101 - 105
Reserved Values
106 - 110
Reserved Values
111 - 115
Standard Mode -Fixture operates at maximum output
(Default)
116 - 120
Studio Mode - Reduced output with lower fan settings
121 - 125
Whisper Mode -Reduced output with lower fan settings
126 - 130 Reserved Values
131 - 135
Record User Color Preset
136 - 140 Fan On (Default)
141 - 145
Fan Auto
146 - 150 Reserved Values
151 - 155
ReCal Position
156 - 160 Reserved Values
161 - 165
ReCal Beam
166 - 170 Reserved Values
171 - 175
Reset
fi
xture to default
176 - 255 Reserved Values
To use control channel functions:
Step 1.
Select an action to be sent.
Step 2.
Set control channel value for desired action (for example, 6 for ReCal). Hold value for 3 seconds.
Step 3.
Set control channel value to zero. (This must occur without any scaling values. Action will be voided if
other values are detected between action value and zero.)
NOTE
: A numerical keypad is suggested for sending values. An encoder or fader does not allow for a quick
Содержание VL5LED WASH
Страница 1: ...VL5LED WASH USER MANUAL WWW VARI LITE COM ...
