6
MAT & COVER ASSEMBLY
12
Lay jumping mat inside frame and
attach a spring into one of the triangle
rings on the mat.
13
Attach spring with ring to frame.
(WARNING) Trampoline is under heavy tension,
more effort may be required to attach springs to
frame. Be careful not to pinch fingers or slip.
Serious injury may occur!
DANGER:
3 adults are required to use spring tools in exact manner as illustrated in STEP 16. Springs will create high levels of
tension when assembled. Please use extreme caution not to pinch your fingers.
15
Attach two more springs half
distance between the first two,
directly across from each other.
19
Lay blue frame cover on outer edge
so springs are covered - just like a
shower cap.
20
Tie all black straps to top rail of
frame, cover.
18
Attach remaining springs until all
springs are placed on frame.
21
That’s it! Your AIRZONE trampoline
is complete!
To disassemble repeat
steps 1-23 in reverse.
1
1
3
4
5
6
7
8
2
2
3
4
14
Repeat this step directly across from
where you attached first spring.
(There should be 42 holes on either side of these
two springs).
16
Use spring tool as shown for the
trampoline is under heavy tension
and more effort may be required
to attach springs.
(3 people needed)
17
Repeat the process of placing the spring
half distance among the already placed
springs. To even out tension, attach the
opposite end of the previous spring.
