IC-664 INSTALLATION GUIDE
5
4. Mounting
•
Use a screwdriver to remove the 3 screws of the top faceplate and the 3 screws of the
access panel.
•
Open both faceplates.
•
Install mounting screw on wall and hang the unit in place by sliding the rear mounting hole of
the IC-664 over the screw (see figure 1).
•
Install two more screws to secure the IC-664 in place using the bottom mounting holes.
FIGURE NO. 1 Mounting Position and Devices
REAR VIEW
TOP MOUNTING
HOLE
BOTTOM
MOUNTING HOLES
This side up
Screw Sizes:
Top mounting hole :
#8 X 1”
Bottom mounting holes:
#6 X 1”
www.monitrol.com
