Varifan CM10-2, Руководство пользователя

Страница: 6 / 16

Page 6
CM10-2
2.3 CONNECTION PROCEDURE
For the connection procedures which follow refer to
Figures 1 and 2.
2.3.1 - Cabling
Use a screwdriver to remove cable knock-outs for the
installation of cabling to the control panel.
2.3.2 - Connecting 115VAC Fans
Refer to figure 1.
•
Connect L1 of the power source to terminal 1 for
fan 1and terminal 3 for fan 2.
•
Connect the ground wire of the power source to the
ground wire in the housing of the unit.
•
Connect the neutral side of the power source to the
neutral of fans 1 and 2.
•
Connect the live lead of fan 1 to terminal 2.
•
Connect the live lead of fan 2 to terminal 4.
2.3.3 - Connecting 230VAC Fans
Refer to figure 2.
•
Connect L1 of the power source to terminal 1 for
fan 1 and terminal 3 for fan 2.
•
Connect the ground wire of the power source to the
ground wire in the housing
•
Connect L2 of the power source to the appropriate
terminals of fans 1 and 2.
•
Connect the appropriate lead of fan 1 to terminal 2.
•
Connect the appropriate lead of fan 2 to terminal 4.
Do not apply power to the control panel until all con-
nections have been completed!
The current draw of the load should be in the range of
0.1A to 10A.
www.monitrol.com