BRUKSANVISNING
31 87-900-929-01 (H)
INSTRUKTIONER FÖR BRUK
Start av styrenheten
Styrenheten startas enkelt genom att sätta strömkabeln i
vägguttaget och sätt huvudströmbrytaren i läge 1.
Start av pumpen
Pumpen startas genom att trycka på tryckknappen
START.
Stopp av pumpen
Pumpen stoppas genom att trycka på tryckknappen
STOPP på frontpanelen.
UNDERHÅLL
Styrenheterna i Turbo-V 2000 ICE-serien är
underhållsfria. Allt servicearbete måste utföras av
auktoriserad personal.
Om styrenheten havererar, kontakta Varian
reparationsverkstad eller Varian utbytesservice, som
kan ersätta styrenheten med en renoverad styrenhet.
!
Innan något arbete utförs på styrenheten måste dess
strömförsörjning brytas.
Skrotning av pumpen ska ske enligt gällande
lagstiftning.
FELMEDDELANDEN
När vissa fel uppstår visar styrenhetens
självdiagnoskrets aktuellt felmeddelande på displayen.
De möjliga meddelandena listas i följande tabell.
1.
Ingångs-/utgångskontaktdon för logiska signaler och
kontroll av effekten till pumpen och
magnetiseringsfrekvensen (anslutningsdonet levereras
med en därtill avsedd brygga för återstängning).
2.
Ingångs-/utgångskontaktdon för logiska signaler enligt
specifikationer SEMI.
3.
Utgångsuttag för effekt (120 V växelström, 1 A) för
matning av tillbehörsredskap (vent device, primärpumpens
aktiveringsrelä, osv.).
4.
Pumpens
kontaktkabel.
5.
Ingångskontaktdon för matarledning.
6.
Kontakt för spänningskabel till heater jacket.
7.
Tillgängligt utrymme för kontakt till seriell port RS-232 -
RS-422 - RS-485 (levereras som tillbehör).
8.
Huvudströmbrytare med termomagnetiskt skydd.
9.
Säkring på spänningsmatning till heater jacket.
10.
Kontakt för anslutningskabel till flödesmätare (flow meter).
11.
Jordanslutning.
VARNING
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com