background image

FRG-700 Inverted Magnetron Pirani Gauge

 

 

 

 

25

 

 

8  Returning the Product 

WARNING

WARNING: forwarding contaminated products 
Contaminated products (e.g. radioactive, toxic, caustic or biological 
hazard) can be detrimental to health and environment. 
Products returned to VARIAN should preferably be free of harmful 
substances. Adhere to the forwarding regulations of all involved coun-
tries and forwarding companies and enclose a duly completed decla-
ration of contamination. 

 

 

 

Products that are not clearly declared as "free of harmful substances" are decon-
taminated at the expense of the customer. 
Products not accompanied by a duly completed declaration of contamination are 
returned to the sender at his own expense. 
 
 
 
 
 
 
 
 

 

9 Disposal 

DANGER

DANGER: contaminated parts 
Contaminated parts can be detrimental to health and environment. 
Before beginning to work, find out whether any parts are contami-
nated. Adhere to the relevant regulations and take the necessary pre-
cautions when handling contaminated parts. 

 

 

 

N

WARNING

WARNING: substances detrimental to the environment 
Products or parts thereof (mechanical and electric components, opera-
ting fluids etc.) can be detrimental to the environment. 
Dispose of such substances in accordance with the relevant local re-
gulations. 

 

 

 

 

After disassembling the product, separate its components according to the 
following criteria: 
 

 

Contaminated components (radioactive, toxic, caustic or biological hazard etc.) 
must be decontaminated in accordance with the relevant national regulations, 
separated according to their materials, and disposed of. 
 

 

Such components must be separated according to their materials and recycled. 
 
 
 

Separating the components 

Contaminated components 

Other components 

Содержание FRG-700 series































Отзывы: