Varian 948, Руководство по эксплуатации и обслуживанию

Страница: 30 / 176

Models 947, 948 and 960 Leak Detectors Operations and Service Manual
1-8
1.4 Inner Door Instruction Label
The label on the inside of the lockable turret door (Figure 1-4) provides:
❑ An abbreviated list of leak detector operating instructions to be used when the
operator is familiar with normal operation of the 947/948/960.
❑ Error codes and solutions.
❑ The leak detector's standard leak setting as measured at the factory.
Figure 1-4 Turret Door Instruction Label
18 Auto Cal Button Press to initiate automatic calibration check. The system must be in
TEST mode to initiate Auto Cal. During the check, all front panel
pushbuttons are disabled. The 947/948/960 transitions back to TEST
mode at the completion of the Auto Cal routine.
19 LED Display Area Refer to Section 3, “Operation” on page 3-1 for definitions of the
LEDs.