Vari 65710, Инструкция по эксплуатации

Страница: 8 / 25

8
SPECIFICATIONS
Model 65710 65715
Trade Name VARI 11 TON SUPER
FORCE
VARI 14 TON SUPER
FORCE
Motor (S6 40 %)*
400 V 3~ 50 Hz
3300 W 5,3 A
400 V 3~ 50 Hz
3500 W 7,1 A
Log Size
Capacity Diameter
10-30 cm
Length 56-104 cm
Maximum Force
11 t ± 10 % 14 t ± 10 %
Hydraulic Pressure 25,5 MPa 24,6 MPa
Hydraulic Oil Capacity 7,0 l 7,5 l
Ram Travel 85 cm
Speed
Forward
23,2 cm/s 21,8 cm/s
4,9 cm/s 4,2 cm/s
Retract 6,1 cm/s 5,2 cm/s
Noise Pressure Level (LpA)
≤
80 dB (A)
Vibration 2,5 m/s
2
Overall
Sizes
Length
144 cm 144 cm
Width 133 cm 135 cm
Height
228 cm 228 cm
Weight 172,5 kg 184,9 kg
* S6 40%, continuous operation periodic duty: time of one load cycle is 10 minutes,
operation time at constant load is 4 minutes, operation time at no-load is 6 minutes.
APPLICATION CONDITIONS
This log splitter is designed for operating under ambient temperatures b5°C
and +40°C and for installation at altitudes not more than 1000 m above M.S.L. The
surrounding humidity should be less than 50 % at 40°C. It can be stored or
transported under ambient temperatures between –25°C and +55°C.
ELECTRICAL REQUIREMENTS
With 3 phase 400 Volt / 50 Hz motor, the log splitter should be connected to standard
400 V ± 10 % / 50 Hz ± 1 Hz electrical supply which has protection devices of under-
voltage, over-voltage, over-current as well as a residual current device (RCD) with
maximum residual current rated at 0,03 A.
The mains connection and extension cable must have 5 wires = 3P + N + PE
(3/N/PE). The mains connection must have maximum 16 A fuse. Electrical
connection rubber cables must comply with IEC 60245, which is always marked with
symbol H 07 RN. Cables should be identified, as it is a legal requirement. The cable
is not supplied with the machine.