EN
7
involve serious injury and damages to
persons and properties.
The
manufacturer
declines
all
responsibility in case of faulty use of the
machine.
BEFORE STARTING THE WORK
Before any work with the machine, make
sure that the cutting tool has been perfectly
assembled, tightened and correctly centred.
Make sure that all nuts and screws are
securely tightened. Make sure the safety
guard protection is correctly assembled
too.
Whenever it is possible, clean the working
area from all foreign objects such as nails,
metal wire, stones or broken glass that
might be thrown or become tangled up in
the cutting tools.
It is prohibited to start the
machine in an enclosed area or in
buildings. The breathing of exhaust gas
can involve dangerous intoxication.
Whenever cutting toxic
grass, pay special attention as the
spraying of chopped grass and vegetal
matters can lead to intoxication. Use
appropriate protections for breathing.
STARTING OF THE ENGINE
FUEL MIXTURE: 1:25 ONLY
Use fresh unleaded gasoline with octane
number 95 and 100% synthetic oil
specially made for heavily stressed two
stroke engines, mix it in a percentage of
4 % (or 25 parts of gasoline for 1 part of
oil.)
By using synthetic oil specially made for
two-stroke engines, it will reduce the
formation of ashes and carbon deposits in
the spark plug, the piston, the muffler and
in the cylinder as well as reducing
emission of exhaust gas. Lubrication will
be at best and it will give a longer life to
your engine.
It is important to use exclusively good
quality and fresh gasoline, use as well
only branded oil. You must use the
mixture during the three weeks that
follow its preparation.
You must absolutely do the
mixture gasoline / oil before you put it
into the fuel tank. In order to obtain a
good mixture, put the oil into the jerry
can after the gasoline. You must do this
operation in an open area away from
any lights, while the engine is turned off
and far apart from any flames or
sparkles, you must not smoke and don’t
use the telephone. Shake up the mixture
in the jerry can and the engine fuel tank
before any use.
You can now proceed with the filling of
the fuel tank, unscrew the cap of the fuel
tank and put the mixture gasoline/oil using
a fuller, be careful not to spill any mixture
around and/or on your clothing, if that
should happen, wipe the spilling with a
clean rag.
Start the engine at least three meters away
from the area where the fuel tank had been
filled up in order to avoid any risks of
potential fire.
Never fill up the gasoline tank while the
engine is hot.
Engine starting
To start the engine, proceed as follow:
1.
Carefully proceed to all the different
steps of preparation and fuel supply,
push the red button on the right handle.