CODE
DESCRIPTION
TROUBLESHOOTING SOLUTION
E01
Over Current
Protection
Over current protection feature triggered, over current always
caused by over loading. Remove items or reduce weight from con-
centrated area (rated loading is average distribution). Follow the
reset instruction to reset the system. If error persists, contact Vari.
E07
Hall Error
E07 will display if the cable connected to the M1 port is not fully
secured. Disconnect and reconnect the cable. Follow below in-
structions to reset (RST) the desk. If the error persists, contact Vari.
H01
Over Duty
Protection
If the desk is raised and lowered continously for more than 2
minutes, it will display this code and cease working temporarily to
protect the mechanism from overheating. Stop adjusting the desk,
and resume after 20 minutes.
RST
System Reset
If the display is showing an ERROR CODE:
Make sure all cables
are securely connected. Press and hold the down button (about
5 seconds) on the control panel until RST flashes on the screen.
Release the down button, and continue with the steps below.
If the display is already flashing “RST”:
Press and hold the down
button until the desk reaches the lowest height, raise slightly, and
finally displaying height number. Do not release the down button
until height number is shown on the control panel. The desk is now
ready to use.
(800) 207-2587
