3
VL5LED WASH
QUICK START GUIDE
INSTALLATION
FLOOR MOUNTING THE LUMINAIRE
This luminaire included in this manual are designed to sit directly in a fl oor installation application. When used
in this type of application, be sure to leave enough space around the luminaire to allow proper, uninterrupted
airfl ow for cooling and movement.
HANGING THE LUMINAIRE
The VL5LED WASH can be hung horizontally or vertically from any structure
designed to work with the type of load created by this moving luminaire. Two
mounting truss hooks or other mounting hardware are required. Many compat-
ible truss hooks are available from diff erent manufacturers for your particular
needs. A minimum of two hooks per luminaire is required. If mounting method
does not use truss hooks, two attachment points, per luminaire, are required.
To install mounting hardware and brackets:
Step 1.
Install truss hooks on two provided truss hook brackets as required as
shown.
NOTE:
Various types of truss hooks can be used. The Clamp (as shown) as well
as many other standard hooks, can be ordered separately.
Step 2.
Determine required confi guration of bracket installation. Brackets may be installed in many diff erent
orientations as shown in Figure 5.
Step 3.
While pulling up on locking mechanism release, fi t keyed holes onto raised mounting buttons at bot-
tom of enclosure. Slide forward and release locking mechanism to lock in place. Ensure brackets are
locked securely.
WARNING!
Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the
luminaire.
