1
QUICK START GUIDE
VL5LED
WASH
91200545005
VL5LED WASH
This document provides basic setup instructions and safety
warnings for the following product(s):
POWER CONNECTOR
VL5LED WASH
QUICK START GUIDE
(this document)
CASE SIP
CASE SIP
WARRANTY CARD
WWW.VA R I - L I T E .CO M
©2020 Signify Holding. All rights reserved.
INCLUDED ITEMS
HOOK RAILS
HOOK RAILS
POWER AND DATA
CONNECTING POWER
The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz. Current required depends
on the AC supply voltage and product model.
NOTE:
The mating power connector is supplied; however, you need to purchase or construct a cable appropri-
ate for your application.
FIGURE 1.
POWER CONNECTOR
Depending on the application, the luminaire’s AC input cable may require a diff erent connector. If required,
install a new connector meeting your requirements using the included wire color code reference.
WIRE*
CONNECTION
green Ground
(earth)
white
AC neutral
black
AC line
*International (harmonized) standard
WARNING!
DO NOT connect to three-phase service in countries with 240 volt power.
USB port
RJ45 connector
DMX in
DMX out
Power in
AC POWER INPUT
3-pole Neutrik® powerCON©
TRUE1 for AC input power
