5
VL800 EVENTPROFILE
QUICK START GUIDE
MENU OPERATION
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes
to the menu items. When the desired menu item is reached, press the desired Menu Button to display the menu
options and to navigate and confi gure the menu options as required.
To navigate and access menu setting/selections:
Step 1.
Make sure unit is powered and turned on.
Step 2.
Press [MENU] to access menu categories.
Step 3.
Use two Arrow (
▲▼
) buttons to navigate through the various options and settings.
Step 4.
Once menu item is reached, press [ENTER] to access the menu item parameters.
Step 5.
Make changes to parameters as desired.
Step 6.
Press [ENTER] button to accept changes.
DMX ADDRESS
To set, edit, and save a DMX address:
Step 1.
Press [MENU].
Step 2.
Press [Up] / [Down] (
▲▼
) arrows until Address (DMX Address) appears. Press [Enter].
Step 3.
Use [Up] / [Down] (
▲▼
) arrow buttons to select the desired digit.
Step 4.
Once all digits are set in DMX address, press [Enter] to set.
Step 5.
DMX will display and is saved.
STATUS BAR
The Status Bar is present at all times and displays luminaire operational information of the luminaire. The Status
Bar contains the following information:
•
LED – indicates current LED state - ON or OFF.
•
MODE – indicates current mode, standard, studio or whisper mode.
•
ERR – Displays a number indicating the total amount of current errors can cycle through short text
descriptions of each error. Example: “Fan” or “LED”. When errors are present, messages will appear in
red text. When no errors are present, NO will display.
• MAP – indicates 16-bit Enhanced, 16-bit or clone mode
• ADDR – Displays the current DMX address for the fi xture.
NOTE:
When the fi xture does not detect a DMX input signal, the DMX address text displays in red text.
TABLE 2.
QUICK REFERENCE MENU KEY SHORTCUTS
MENU KEY SHORTCUTS
FUNCTION
Holding Menu at Power up
Bypass Calibration
Menu + Up (
▲
)
ReCal All
Menu + Down (
▼
)
Pan / Tilt Deactivated
Menu + Enter
Factory Defaults
Enter + Up (
▲
)
Lamp On
Enter + Down (
▼
)
Lamp Off
Up (
▲
) + Down (
▼
)
Display FLIP
Enter + Up (
▲
) + Down (
▼
) at Power up
Reset Timers Shortcut
Содержание EVENTPROFILE VL800
Страница 7: ...7 VL800 EVENTPROFILE QUICK START GUIDE...
