Vari Lite EVENTPROFILE VL800 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 34

Vari Lite EVENTPROFILE VL800 Скачать руководство пользователя страница 22

USER MANUAL

WWW.VA R I - L I T E .CO M

VL800 EVENTPROFILE

22

MENU OPERATION

WHAT IS THE MENU SYSTEM?

The menu system is a programmable set of commands used to
conﬁ gure, address, operate, and test the luminaire. The menu
system is controlled at the Menu Display available at the enclo-
sure input panel.

CONTROLS OPERATION

The menu system is controlled by [MENU], [ENTER], and four

▲▼

arrow buttons.

The arrows have opposite functions if the luminaire is hung
upside down in a hanging orientation due to the automatic ori-
entation feature. In other words, the arrow pointing downward
always functions as down/decrease and the arrow pointing
upward always functions as up/increase regardless of the lumi-
naire orientation.

DEFAULT STATE

The menu display’s default state during normal operation is to display the DMX address. After 40 seconds of
inactivity at the display, it will change to the default state.

After longer periods of inactivity, the menu display will switch to its off state. The default state for this feature is
30 seconds, however, diff erent time lengths can also be programmed.

To program a diff erent time length for menu off feature:

Step 1.

Press [ESC] access the main menu.

Step 2.

Once enabled, the menu will function as normal with only the following sub-menu sections active:

• Address

• Conﬁ gure

• DMX

• Fixture

• Manual

Control

• Test

Step 3.

Press

▲▼

choose the “Conﬁ gure”, and press [ENTER].

Step 4.

Press

▲▼

choose the “Display”, and press [ENTER].

Step 5.

Press

▲▼

choose the “On Time”, and press [ENTER].

Step 6.

Press

▲▼

choose “30 Sec”, “5 Min”, “10 Min”, “On” when you need.

MENU FUNCTIONS

For easy reference, each possible menu item is listed alphabetically in the ﬁ rst column by its display abbre-
viation. The second column follows with a deﬁ nition of the abbreviation and then a third column provides an
explanation of its purpose and function.

To select any functions, press the MENU button until the required one is shown on the display. Select the func-
tion by the ENTER button and the display will blink. Use the DOWN and UP button to change the mode. Once
the required mode has been selected, press the ENTER button to setup or it will automatically return to the
main functions without any change after idling one minute. Back to the functions without any change press the
MENU button.

Enter Button.

To confirm the

selected functions.

LCD Display.

Shows menu

and selected functions

Menu Button.

To select the

programming functions.

Ÿź

Buttons.

To go forward/

backward in the selected

functions

5

MENU SYSTEM

«
...
20
21
22
23
24
...
»

Содержание EVENTPROFILE VL800



































Отзывы:

Нет отзывов