User Manual: UM19893-EN
Harmony3 series
Revision: 5.0
Date of release: 2019-01-29
5
/20
www.vareximaging.com
1.
Introduction
This document is accompanying the Harmony3 series (see also §1.7). Additional to this User Manual a
Technical Manual is supplementary to the INSTRUCTIONS FOR USE.
1.1.
Contact information
This manual provides all the technical information necessary for the correct application, operation and
maintenance of the device. Consult the Technical manual for correct installation and service of the
device.
If you need additional information, need support or want to report a problem with the device, please
contact your distributor or Varex Imaging Nederland B.V.:
Manufacturer
Distributor
Name
Varex Imaging Nederland B.V.
Address
Anholtseweg 44,
7091 HB Dinxperlo
The Netherlands
Telephone
+31 (0)315 659 150
Fax
+31 (0)315 659 140
Website
www.vareximaging.com
1.2.
Abbreviations
Term
Definition
EMC
Electromagnetic compatibility
RAD
Radiology
TM
Technical Manual
ABS
Acrylonitrile Butadiene Styrene
AEC
Automated Exposure Control
NR
Non-Rotating version of the Harmony3 series
ST
STationairy version of the Harmony3 series
1.3.
Symbols used in this document
To ensure adequate and clear understanding of the information provided in this manual, the symbols
listed below are used to indicate warnings, cautions, actions and notes that are important for correct
and safe use of the device.
WARNING:
Warnings are directions which, if they are not followed, can cause fatal or serious injuries
to a user, engineer, patient or any other person or can lead to a mistreatment.
CAUTION:
Cautions are directions which, if they are not followed, can cause damage to the device
described in this manual or any other equipment or goods and can cause environmental
pollution.
NOTE:
Notes provide advice and highlight unusual points. A note is not intended as an
instruction.
