VARES Fruit SHARK, Оригинальная инструкция по эксплуатации

Страница: 14 / 43

Fruit Crushers SHARK Fruit Instructions for use
14
Caution: If the crusher stops owing to overloading, it is prohibited to take the contents
out of the working space of the crusher by hand and put hands into the internal
space if the machine is not entirely at standstill and its off-state is not ensured by
pulling the plug of the fl exible cord out of the mains socket!
Caution: When working with the crusher, the operator has the duty to use ear protectors to
protect his/her hearing organs!
Notice: Frequent overloading of the electric motor may cause its excessive warming and damage.
7.1 Working with the machine
The SHARK FRUIT crusher is intended for processing fruit, e.g. apples, pears, plums, apricots, grapevine,
currants etc. Crushed fruit has an ideal coarseness and consistency for further processing: production of
ciders, juices, home-made squashes, fruit pulp, wine or spirits.
Fruit (individual fruits) with a diameter of up to 10 cm can be crushed.
Fruit is processed in a very effi cient manner by means of the stainless mechanism of the crusher (upper
stainless airscrew, cutting stainless blade on a rotating bearing plate, 2 800 rev./min.).
The machine may only be used provided that all the directions given in these “Instructions for use” have
been followed, in particular those in Chapter 4.
7.1.1 Preparing for work
• Position the machine on a hard fl at base (concrete fl oor, pavement etc.).
• Perform all the instructions given in points 4.1 to 4.5.3.
• If all the instructions mentioned above have been carried out, insert the plug of the fl exible cord of
the crusher into a mains socket.
• Make sure that the vessel for collecting crushed fruit is secured. The vessel must be secured by
clicking the vessel handle behind the locking mushroom knob shut. The FRUIT tongue must be tilted
off behind the vessel.
• Turn on the machine.
7.1.2 Putting fruit into the machine
• Use a plastic bucket or basket to put fruit into.
• Put fruit into the hopper evenly.
• Cut fruits that are larger than 10 cm in two.
7.1.3 Filling the vessel with crushed fruit
• The SHARK Fruit machine includes one 20-litre plastic vessel for collecting crushed fruit.
• The volume of crushed fruit in the vessel can be easily checked visually even while the machine is
running by lifting off the vessel’s lid. After checking the level in the vessel (fi ll rate of the vessel), put
the lid back on.
• We recommend interrupting the crushing at the moment when the vessel is fi lled to ca. 2/3 of the
capacity.
• Wait approx. 2 minutes so that the crushing of fruit that has already been put into the crusher can be
completed; the working mechanism must be entirely emptied before the machine is turned off.
• Turn the machine off when no fruit pulp fl ies into the vessel any more.
• Unlock the vessel by unlocking the vessel handle from the locking mushroom button.