Vaporesso GEN Fit, Руководство пользователя

Страница: 6 / 28

3 ENGLISH
USE INSTRUCATIONS
1.Assemble the Coil & Tank [Refer to FIGURE 1]
Unscrew the bottom cap of the tank.
Insert the MTX coil.
Screw the bottom cap back.
Screw the 510 thread of the tank onto the mod.
2.Fill the E-liquid [Refer to FIGURE 2]
Unscrew the top cap of the tank.
Inject the e-liquid through the filling holes.
Screw the top cap back.
*If it’s the first time filling the e-liquid, please wait 5 minutes
for the coil to prime.
3.Adjust the Airflow
Twist the airflow ring to adjust the airflow.
4.Power ON/OFF [Refer to FIGURE 3]
Click the power button five times to power on or power off the
device.
5.Adjust the Voltage [Refer to FIGURE 3]
Click the power button three times to change the voltage level.
(3.0V-3.3V-3.5V)
6.Display Functions [Refer to FIGURE 3]
● Battery Level: Check the LED on the top of the Mod.
● Voltage Level: Check the LED on the side of the Mod.
7.Start Vaping
The device is both draw-activated and button-activated. Inhale
directly or long press the power button would active the mod.
8.Charging
Please use the in-box Type-C cable to charge the device.
Charging: Battery Level: Voltage Level: Breath
Fully Charged: Battery Level: Voltage Level: Stay on
CAUTIONS
PROTECTIONS
1. Please turn off the device when it is not in use.
2. Do not leave the charging device unattended.
3. Do not drop, throw or abuse your device, which may cause
damage.
4. Please use a standard USB output charger with proper
charging current and voltage range.
5. Keep away from the water or any flammable gas, liquid .
6. Do not expose the device to direct sunlight, dust, moisture
or mechanical shock.
7. Do not expose the device to extreme temperature.
(Recommended temperature range: -10~60 ℃ /14~140 ℉ while
using and -10~45
℃
/14~113
℉
while storing).
1. Low / High Resistance / Short-circuit / No Load / Overheat /
Overtime(8s) Protections: The device will stop working and the
RED battery indicator will breath 5 times then go out.
2. Low Voltage / Over Discharging Protections: The device will
stop working and the RED battery indicator will breath 3 times
then go out.
3. Over Charging / USD High-voltage Input Protections: The
device will stop charging.