© 2014 JTBD Limited. All rights reserved.
6
4.
Push, or tap, the atomiser out of the atomiser casing and discard
5.
Insert a new atomiser into the atomiser casing and twist the middle disc
back into the casing
6.
Reattach the atomiser unit to the battery and insert the cartridge.
Note that a new atomiser will take some time for the fluid to soak into the
vaporising unit. We recommend allowing the fluid to be absorbed into the
atomiser by standing the Smini on the light indicator for a few minutes.
Charging.
1.
Unscrew the Smini battery atomiser casing. Note that the middle disc
should remain attached to the atomiser casing:
2.
Screw the Smini battery into the USB charger provided and plug the
charger into a USB point or the wall charger (available from
vapo.co.nz):
3.
The light on the charger will change from RED to GREEN once the
Smini battery is fully charged. Remove the battery from the charger and
reassemble the unit.
Note: The light indicator on the Smini battery will flash when the unit requires
charging.
Filling.
The Smini is designed as a refillable vaporising unit.
1.
Pull the cartridge from the rear of the unit:
2.
Remove the rubber plug at the atomiser end of the cartridge (not the
end you draw from).
