READ BEFORE USING
Most automotive finishes require a softer, plusher buffer bonnet than the terry cloth bonnet provided
with this product.
Use the clean terry cloth bonnet provided with this product to apply
wax and related chemicals only, do not use it again to remove wax or buff a waxed sur-
face even though it has been washed.
Otherwise, paint damage may occur.
Use the clean
synthetic wool bonnet to buff waxed finishes.
Star Asia-USA, LLC, her successors, assigns and
insurers will not be responsible for damage as a result of failure to heed this notice.
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking & Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Random Orbital Buffer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
INTRODUCTION
The Vaper 10” Random Orbital Buffer is designed for polishing, waxing, and buffing. Powered by a
durable 0.92 Amp motor, the random orbiting mechanism delivers 3,000 operations per minute (OPM),
mimicking the motion of circular hand polishing. Dual hand grips provide added control. Designed for
years of trouble-free use, it will tackle your automotive finish maintenance applications with ease.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, main-
tenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents
of this instruction manual are based upon the latest product information available at the time of publica-
tion. The manufacturer reserves the right to make product changes at any time without notice.
SAFETY ALERT
Read and understand this entire instruction manual before attempting to assem-
ble, install, operate or maintain this random orbital buffer. Failure to comply with
the instructions may result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
random orbital buffer:
Indicates an imminently hazardous situation that, if not avoided, WILL result in
death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD result in
death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in
minor or moderate injury.
Indicates important information, which if not followed, MAY cause damage to
equipment.
UNPACKING & INSPECTION
After opening the carton, unpack your new random orbital buffer and related parts & accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against the
photograph on carton. If any parts are missing, please call factory customer service at 1-800-386-0191.
Do not operate this random orbital buffer if damaged during shipment, handling
or misuse. Do not operate the tool until the parts have been replaced or the fault
rectified. Failure to do so may result in serious personal injury or property damage.
All damaged parts must be repaired or replaced as needed prior to operating this tool.
Check to see that all nuts, bolts and fittings are secure before putting this tool into service. If you have
any questions, or require assistance with damaged or missing parts, please contact our factory customer
service department at:
1-800-386-0191
Please have the model number and date of purchase available for reference when calling.
MODEL NUMBER:
____22610 __________________
DATE of PURCHASE:
___________________________
SAFETY WARNINGS
READ ALL SAFETY WARNINGS BEFORE USING BUFFER/POLISHER
Some dust created by spraying, blowing, power sanding, sawing, grinding, drilling and other construc-
tion activities contains chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm.
Reduce your exposure to these chemicals by wearing approved safety equipment such as dust masks
that are designed to filter out microscopic particles.
Use of this product will expose you to chemicals known to the State of California to cause cancer, birth
defects, and reproductive harm.
Avoid inhaling vapors and dust. Wash hands after using.
This product contains chemicals, including lead, known to the State of California to cause cancer, birth
defects, and reproductive harm.
Wash hands after handling.
3
2