VapeOnly vPipe III, Руководство пользователя

Страница: 8 / 10

HOW TO USE
HOW TO INSTALL
Step 1 Disconnect the battery cap.
Step 2 Install a fully charged battery and connect the battery.
Step 3 Remove the mouthpiece and disconnect the atomizer.
Step 4 Open the atomizer and fill in e liquid (see “how to fill e-liquid”).
Step 5 Rotate the air inlet valve and makesure it is open, then connect
the atomizer.
Step 6 Install the mouthpiece
Note: Before the first use, let it sit for 3 minutes to ensure that the coil
is fully saturated, so as not to be burned.
HOW TO FILL E-LIQUID
Step 1 Remove the mouthpiece and disconnect the atomizer
Step 2 Hold the atomizer upside down and unscrew the coil
Step 3 Fill the e-liquid in the tank
Step 4 Install the coil in the atomizer
Step 5 Install the atomizer in the pipe
Step 6 Install the mouthpiece
HOW TO CHANGE THE COIL
Step 1 Unscrew the coil base
Step 2 Unscrew the coil
Step 3 Install a new coil
Step 4 Screw the base on the atomizer
HOW TO CHANGE THE BATTERY
When the battery is running low, unscrew the cap and take the battery
out, and put a fully charged battery in the pipe, please notice the
positive and negative poles of the battery. Screw the cap back on the
pipe.
HOW TO CHARGE
Put the empty battery in the charger, please notice the positive and
negative poles. The charging time is 3-4 hours.
3
1 2
1 2 3
4 5
1 2 3
6
1
4
2
5
3
6
1
3
2
4
Open