Vanu CompactRAN, Руководство по установке оборудования, Страница: 42 / 44

32 Vanu CompactRAN CDMA/GSM Base Station Hardware Installation Guide
• Two omnidirectional antennas mounted with vertical separation should provide
adequate isolation, however care must be taken to account for the proximity to
the mast structure.
• 8 dBi maximum gain is recommended for best trade-off between vertical beam
width and range.
V
ERIFYING THE
F
IRMWARE
Caution:
It is RECOMMENDED that you use ConfigCenter to
update the firmware. Contact
Vanu Technical Support
before updating the firmware using the following
procedure.
Complete the following steps to update the CompactRAN firmware using the
ConfigureCell tool:
Note: Repeat these steps for each CompactRAN.
1. Start the CompactRAN Configure Cell tool.
Refer to Setting Up the CompactRAN .
2. Select the CompactRAN you want to verify ( Figure 3-5 ).
3. Click Open Cell Control Page The Verify Firmware Version screen displays.
( Figure 5-1 ).