Vanu CompactRAN, Руководство по установке оборудования, Страница: 36 / 44

26 Vanu CompactRAN CDMA/GSM Base Station Hardware Installation Guide
I
NSTALLING THE
C
OMPACT
RAN CDMA/GSM B
ASE
S
TATION
Caution:
Refer to
Installation Warnings
before installing the
CompactRAN GSM/CDMA base station.
WARNING:
If you are installing the CompactRAN GSM/CDMA base
station to a wall, make sure there are no electrical
cables behind the wall.
Complete the following steps to attach the CompactRAN GSM/CDMA base station to
the pole or wall:
1. Align the mounting bracket on the pole or wall ( Figure 4-7 ).
Note: Make sure it is level.
Figure 4-5. Mounting Bracket
2. Secure the mounting bracket with the three (3) Hex Head 5/8” Lag Screws, 4”
long.
3. Remove the nuts from the screw posts on top of the CompactRAN
CDMA/GSM base station ( Figure 4-6 ).
Mounting Holes
Bottom of
Bracket
Top of
Bracket