- 18 -
Note:
5.2.4
Parking Mode (Constant Power Supply Needed.)
Parking Mode operates as a sentry function in different situations. To
activate Parking Mode, go to "Record Setup">“Parking Mode”, press
and select the following options: Collision Detection, Motion Detection,
Low Bitrates Recording, OFF.
In the parking mode, the dash cam cannot use time lapse.
To ensure the camera is able to function in Parking Mode, please keep it
powered with a mobile power bank or hardwire it directly to the car
battery. We do not recommend running the camera continuously for
too long.
The X4S working environment temperature is 14
℉
-158
℉
（
-10
℃
-60
℃
）
,
we recommend using Collision Detection within this temperature range,
so once the temp is beyond the normal working temp range, it will auto
shut off. If the temperature is high, please take the camera off when you
park your car.
1.Collision Detection Triggered
When the Collision Detection was turned on, and no movement is detect-
ed after 5 minutes of recording, then Collision Detection is activated with
a Collision Detection icon at the bottom right corner of the screen, and
the camera automatically turn off. Full frame recording will be triggered
by the Collision Detection sensor. Once the dash camera detects vehicle
impacts or collisions, it will auto turn on and start auto recording, each
motion detection recording is 1 min. it will stop recording and auto off
again after 5 minutes of inactivity.
