Vantrue OnDash T2, Руководство пользователя

Страница: 14 / 67

to a power source, it will not immediately start on and record.
While recording, the LED indicator will blink and a red dot will flash
on the top left of the screen. You can stop/start the recording at
any time by pressing the OK button.
By default, the Loop Recording Time is 3 minutes. Please go to “RECORD
SETUP”►“Loop Recording” to change it to 1 minute or 5 minutes. When
Loop Recording is turned off, the camera will record video in 25 minute
clips, but will not overwrite old videos when the storage card is full.
The loop recording video file name formats “Year_Date_Time_Serial”.
For example:“2017_0101_060101_001”, . Standard files are stored in the
“Video/Normal” folder. When the Micro SD card is full, the camera will
write over older files.
4.5 Event Recording
- 13 -
Critical event detection is triggered by the G-Sensor (Gravity Sensor)
and will auto-detect vehicle impacts and collisions. This will cause
the camera to protect the current video clip from being overwritten
by locking it and saving the footage in the “Event” folder.
The vehicle driver can also manually lock the current video recording
session by pressing the Emergency Button. A key icon will appear
at the top right of the screen.
The G-Sensor sensitivity is adjustable with 3 settings: Off, Low, Medium
and High– it is set to Medium by default. The G-Sensor can also be
deactivated in “RECORD SETUP”►“G-Sensor ”.
0
2018/05/03
00:00:23
05:00:53
1080FHD
3