Vantrue Nexus 4 Pro, Руководство пользователя

Страница: 11 / 43

- 8 -
3.2.5 Front Camera Installation
Remove the protective film from the mount, then fix the
mount and camera on the electrostatics stickers.
Please peel off th
is ma
sk
AFTER
appli
cation
compl
eted
Plea
se pee
l off t
his
mask
BEF
OR
E ap
plication
the protective film from No.2. Remove the 3M tape
from the mount, then fix the mount and camera on the
electrostatics stickers.
3.2.6 Rear Camera Installation
Please select the installation position on the rear
windshield. Remove the protection film of the sticky
pad and rear camera lens. Take out the rear camera
cable and connect the rear camera to the front main
camera with the rear camera cable, and connect the car
charger to power on.
After the camera is powered on, choose a suitable
location and install it.
We recommend that you select a position close to the
center of the rear windshield, and avoid the defogging
line on the rear windshield, so as not to affect the
video effect.
Note:
•
After the rear camera is fixed, it is recommended that
the lens be cleaned with the VANTRUE matching
dust-free cloth.
The angle of the cabin camera can be adjusted up and
down by 45°, and the rear camera can be adjusted by
360°.