Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
GAPL Edge Computing Gateway | User Manual
15
5.
Unscrew the SIM slot cover on the right side of the Gateway;
6.
Insert an activated SIM card into the SIM slot with the gold-colored contacts facing up;
7.
Push the SIM card to secure it;
8.
Place the cover back and tighten the screw;
9.
Install the antennas, round to the Wi-Fi & BT, LoRa SMA connectors respectively (RF2,
RF4 & RF6), flat to the 4G/5G SMA connectors (RF1 & RF5), the magnetic sucker
antenna to the GPS SMA connector (RF3);
In case you have only one Wi-Fi & BT antenna or 4G/5G antenna, connect it to the
primary SMA connector (RF1/RF2) for better signal strength.
10.
When
necessary, connect one end of an Ethernet cable to either of the RJ45 Ethernet
jacks and the other to a switch or server;
The RJ45 Ethernet jacks work in WAN area by default.
11.
Connect a mouse, a keyboard, and a monitor to the Gateway for better control of the
device;
12.
Insert the 3-pin connector of the power cord to the power jack of the Gateway with the
pins properly positioned;
13.
Plug the adapter to a power outlet that meets the supply voltage requirement (12V
to 36V DC) to turn on the Gateway.
Slot cover
