Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
GAPL Edge Computing Gateway | User Manual
14
Before you proceed with further configuration of the Gateway, follow the steps below to
finish hardware connection.
1.
Hold the Gateway firmly in the vertical direction;
2.
Fit the sliding hooks of the DIN rail bracket into one side of the DIN rail;
3.
Push down the top of the DIN rail bracket or use a tool to pull down the bottom to
compress the spring till the top of the bracket snaps into the two lugs to allow the
hooks to grip the edges of the DIN rail;
4.
Swing the Gateway to ensure it is fastened on the DIN rail;
lug
lug
Top
Bottom
