vantiva COM3000, Руководство по установке

Страница: 26 / 58

~ 26 ~
COM3000 Integrator’s
Installation Manual
Date: January 2024 Version 1.1
9.2 QAM CARRIER LICENSE
Verify the QAM4 license count is correct for your installation and matches the bill of materials from your
distributor.
QAM4 license files are uploaded using the same procedure as software updates.
The license count is displayed in the Control section, next to the MAC address.
9.3 QAM CARRIER CHANNEL ASSIGNMENTS
The QAM carriers can be assigned in one of two 128 RF channel groups.
Low group channels 1-128
High Group channels 26-158
If you need to utilize channels above 128 you must have all QAM carriers at or above 26
Channel outputs are set using the three boxes in the control section as shown below.
The three boxes at the bottom of the control screen are used to reference the following:
Index
Sets the QAM index referenced in the first column of the QAM table. By default, the field is populated with -1. As a
safety measure you must delete the -1 and enter the QAM Index.
Freq
Sets the QAM carrier index to be assigned to the QAM referenced in the first box.
Count
Sets the number of QAMs to be set in sequential order.
Index 1 Freq 23 Count 48 will set all the licensed QAM outputs sequentially, starting at Ch 23
Setting the Index to a specific QAM index and the count to 1 will change the output carrier to that channel.
Index 10 Freq 40 Count 1 will set the QAM index carrier 10 to output Ch 40
Changing the count will set output carriers in sequential order starting with the Index specified.
Index 10 Freq 40 Count 5 will set all the QAM index carrier 10 to output Ch 40, index 11 to 41, index 12 to 42, etc.