Vante SEBRA 2389, Инструкция по эксплуатации

Страница: 11 / 12

5
4.0 Battery Pack Insertion into Power Source
4.1 Check to see that the Model 2380 power switch is in the “

”(off) position. Open the battery
compartment door on the power source case by sliding the latch to the right. See Figure 4.1.
Figure 4.1
4.2 Position the battery connector as shown in Figure 4.2.
CAUTION: Use only with battery packs equipped with a Positive Thermal Cutout (PTC)
device and/or approved for use with Vante® SEBRA Model 2380.
Figure 4.2